Arduino MicroΒΆ
| Arduino | GPIB connector | Function |
|---|---|---|
| D3 | 1 | DIO1 |
| D15 | 2 | DIO2 |
| D16 | 3 | DIO3 |
| D14 | 4 | DIO4 |
| A0 | 5 | EOI |
| A1 | 6 | DAV |
| A2 | 7 | NRFD |
| A3 | 8 | NDAC |
| D4 | 9 | IFC |
| D7 | 10 | SRQ |
| D2 | 11 | ATN |
| GND | 12 | Shield |
| D8 | 13 | DIO5 |
| D9 | 14 | DIO6 |
| D10 | 15 | DIO7 |
| D6 | 16 | DIO8 |
| D5 | 17 | REN |
| GND | 18,19,20,21,22,23 | GND |
The Micro is a very small form factor board that can be adapted to fit on the back of an IEEE488 connector. The design was contributed by Artag:
https://www.eevblog.com/forum/projects/ar488-arduino-based-gpib-adapter/msg2718346/#msg2718346
Adapter boards are available from: